Supply and installation of draining outlet consists in a flange corner and a circular tube long 500 mm. Made of TPE (thermoplastic elastomer). Used for the complete evacuation of rainwater in roof.Used for the complete evacuation of rainwater in roof. • Apply a coat of primer in the area around the hole. • Apply a first layer of cover membrane. • Insert the plug in the hole and mark the point in which it must be cut. • Heat the surface of the waterproof membrane, then adhere to the outlet flange. • Heat a small piece of membrane. Spread with a spatula on the flange to enable the pipe to adhere to the cover membrane. • Apply a second waterproofing layer, heating the bitumen, after covering both the flange and the membrane.

Draining water outlet, Dakota, Thermoplastic, 62.5x18x3.2 cm xØ100 mm