EMOS maintenance-free lead-acid batteries are intended as replacement batteries for UPS emergency power supplies, RBC sets, electronic security systems (ESS), electrical fire alarm systems (EPS), elevator support systems, etc. Batteries of this type are not intended for energy storage, e.g. in solar systems, and cannot be used as starter batteries for cars, motorcycles and electric scooters. Maintenance-free, valve-controlled EMOS lead-acid batteries in AGM design can be installed in any position. AGM batteries contain electrolyte impregnated with glass laminate microfibres, which are part of the separators between the individual lead plates. This is basically a glass fleece into which the electrolyte is absorbed during pouring. Acid spillage is no longer a threat, and the batteries are therefore very safe to use . Battery safety valves prevent the battery from exploding in the event of gassing. The entire battery cover complies with the relevant standard, and the battery meets the general product safety requirements. efore first use, the battery should be charged . If the battery is inserted into a device that cannot detect its charge state, the battery may be completely discharged, which will cause irreversible damage - destruction of the battery. The battery must be charged using an appropriate power supply or charger supporting AGM technology , the charging voltage of which is 14.4 V for 12 V batteries and 7.2 V for 6 V batteries . If the charger or power supply does not have these parameters, incomplete charging, rapid energy consumption and, in extreme cases, destruction of the battery will occur. Most EMOS maintenance-free lead-acid batteries are equipped with FASTON terminals . FASTON terminals are widely used in electronic and electrical devices and in the automotive industry. FASTON terminals allow for quick connection of the cable and connector to the battery.

AGM battery, EMOS, 12V/9 Ah, 15.1×6.5×9.4 cm